Mass balance method for purity assay of phthalic acid esters: development of primary reference materials as traceability sources in the Japan Calibration Service System

Purity assay of high-purity materials (HPMs) of phthalic acid esters (PAEs) was carried out by means of a mass balance method. In this method, chromatographic methods such as gas chromatography-flame ionization detector (GC-FID) and/or high-performance liquid chromatography (HPLC) in combination with other methods such as Karl-Fischer (KF) titration and vacuum evaporation (VE) were applied. The sum of the impurities estimated by these methods allowed the estimation of the purity of the main component by difference. Seven PAEs with varying side chain structures and levels of impurities were analysed on a systematic way in which impurities were classified into several groups in terms of their abundance, availability of qualitative information and availability of authentic compounds, etc. The absolute quantity of each impurity was determined by GC-FID and/or HPLC based on the calibration made by the authentic compounds of impurities whenever available. The purities in mass fraction of these PAEs were certified at the National Metrology Institute of Japan (NMIJ), and the PAEs were registered as primary reference materials playing an essential role in linking the metrological traceability of the Japan Calibration Service System (JCSS) to the International System of Units (SI).     

Rhodium-Catalyzed Highly Diastereo- and Enantioselective Synthesis of a Configurationally Stable S-Shaped Double Helicene-Like Molecule

An S-shaped double helicene-like molecule (>99 % ee), possessing stable helical chirality, has been synthesized by the rhodium(I)/difluorphos complex-catalyzed highly diastereo- and enantioselective intramolecular double [2+2+2] cycloaddition of a 2-naphthol- and benzene-linked hexayne. The collision between two terminal naphthalene rings destabilizes the helical chirality of the S-shaped double helicene-like molecule, but the introduction of two additional fused benzene rings significantly increases the configurational stability. Thus, no epimerization and racemization were observed even at 100 °C. The enantiopure S-shaped double helicene-like molecule forms a trimer through the multiple C−H⋅⋅⋅π and C−H⋅⋅⋅O interactions in the solid-state. The trimers stack to form columnar packing structures, in which neighboring stacks have opposite dipole directions. The accumulation of helical structures in the same direction in the S-shaped double helicene-like molecule enhanced the chiroptical properties.     

Exploiting the Potential of Meroterpenoid Cyclases to Expand the Chemical Space of Fungal Meroterpenoids

Fungal meroterpenoids are a diverse group of hybrid natural products with impressive structural complexity and high potential as drug candidates. In this work, we evaluate the promiscuity of the early structure diversity-generating step in fungal meroterpenoid biosynthetic pathways: the multibond-forming polyene cyclizations catalyzed by the yet poorly understood family of fungal meroterpenoid cyclases. In total, 12 unnatural meroterpenoids were accessed chemoenzymatically using synthetic substrates. Their complex structures were determined by 2D NMR studies as well as crystalline-sponge-based X-ray diffraction analyses. The results obtained revealed a high degree of enzyme promiscuity and experimental results which together with quantum chemical calculations provided a deeper insight into the catalytic activity of this new family of non-canonical, terpene cyclases. The knowledge obtained paves the way to design and engineer artificial pathways towards second generation meroterpenoids with valuable bioactivities based on combinatorial biosynthetic strategies.     

Mechanical and tribological properties of DLC coatings deposited by plasma-based ion implantation and deposition method on polyoxymethylene

Polyoxymethylene (POM, polyacetal) is one of the most popular plastics for machine elements, especially in Japan. However, it is difficult to use it under severe operating conditions such as high speed and high contact pressure. Diamond-like carbon (DLC) coatings were well known to be tribological and functional coatings. However, both POM and DLC coatings are difficult to adhere them each other. In the present paper, DLC coatings are deposited by plasma-based ion implantation and deposition (PBIID) method on POM substrate, and validity of DLC coatings on POM was investigated through friction and mechanical tests. When gas pressure was 0.2 and 0.8 Pa, hardness and adhesion properties of DLC coating deposited under gas pressure of 0.5 Pa were lower compared with under 0.2 and 0.8 Pa. For preparing DLC coatings having hard and good adhesion properties, relatively thin substrate was suitable. A correlation between relative humidity in the laboratory and friction coefficient was confirmed while DLC coatings remain on the substrate.     

Chemoselective Catalytic Conjugate Addition of Alcohols over Amines

A highly chemoselective conjugate addition of alcohols in the presence of amines is described. The cooperative nature of the catalyst enabled chemoselective activation of alcohols over amines, allowing the conjugate addition to soft Lewis basic α,β‐unsaturated nitriles. Divergent transformation of the nitrile functionality highlights the utility of the present catalysis.     

Synergistic Spin Transition between Spin Crossover and Spin‐Peierls‐like Singlet Formation in the Halogen‐Bonded Molecular Hybrid System: [Fe(Iqsal)2][Ni(dmit)2]⋅CH3CN⋅H2O

To introduce halogen‐bond interactions between a cation and an anion, a novel Fe^III complex from iodine‐substituted ligands involving a paramagnetic nickel dithiolene anion was prepared and characterized. The compound exhibited the synergy between a spin‐crossover transition and a spin‐Peierls‐like singlet formation. The halogen‐bond interactions between the iodine and the sulfur atoms stabilized the paramagnetic state of π‐spins and played a crucial role in the synergistic magnetic transition between d‐ and π‐spins. In addition, the compound showed the light‐induced excited spin state trapping effect.     

High‐Quality Three‐Dimensional Nanoporous Graphene

We report three‐dimensional (3D) nanoporous graphene with preserved 2D electronic properties, tunable pore sizes, and high electron mobility for electronic applications. The complex 3D network comprised of interconnected graphene retains a 2D coherent electron system of massless Dirac fermions. The transport properties of the nanoporous graphene show a semiconducting behavior and strong pore‐size dependence, together with unique angular independence. The free‐standing, large‐scale nanoporous graphene with 2D electronic properties and high electron mobility holds great promise for practical applications in 3D electronic devices.     

Selective Generation of Formamides through Photocatalytic CO2 Reduction Catalyzed by Ruthenium Carbonyl Compounds

The selective formation of dialkyl formamides through photochemical CO₂ reduction was developed as a means of utilizing CO₂ as a C₁ building block. Photochemical CO₂ reduction catalyzed by a [Ru(bpy)₂(CO)₂]²⁺ (bpy: 2,2′‐bipyridyl)/[Ru(bpy)₃]²⁺/Me₂NH/Me₂NH₂⁺ system in CH₃CN selectively produced dimethylformamide. In this process a ruthenium carbamoyl complex ([Ru(bpy)₂(CO)(CONMe₂)]⁺) formed by the nucleophilic attack of Me₂NH on [Ru(bpy)₂(CO)₂]²⁺ worked as the precursor to DMF. Thus Me₂NH acted as both the sacrificial electron donor and the substrate, while Me₂NH₂⁺ functioned as the proton source. Similar photochemical CO₂ reductions using R₂NH and R₂NH₂⁺ (R=Et, nPr, or nBu) also afforded the corresponding dialkyl formamides (R₂NCHO) together with HCOOH as a by‐product. The main product from the CO₂ reduction transitioned from R₂NCHO to HCOOH with increases in the alkyl chain length of the R₂NH. The selectivity between R₂NCHO and HCOOH was found to depend on the rate of [Ru(bpy)₂(CO)(CONR₂)]⁺ formation.     

Enhancement of Solar Hydrogen Evolution from Water by Surface Modification with CdS and TiO2 on Porous CuInS2 Photocathodes Prepared by an Electrodeposition–Sulfurization Method

Porous films of p‐type CuInS₂, prepared by sulfurization of electrodeposited metals, are surface‐modified with thin layers of CdS and TiO₂. This specific porous electrode evolved H₂ from photoelectrochemical water reduction under simulated sunlight. Modification with thin n‐type CdS and TiO₂ layers significantly increased the cathodic photocurrent and onset potential through the formation of a p–n junction on the surface. The modified photocathodes showed a relatively high efficiency and stable H₂ production under the present reaction conditions.     

Mapping Platinum Species in Polymer Electrolyte Fuel Cells by Spatially Resolved XAFS Techniques

There is limited information on the mechanism for platinum oxidation and dissolution in Pt/C cathode catalyst layers of polymer electrolyte fuel cells (PEFCs) under the operating conditions though these issues should be uncovered for the development of next‐generation PEFCs. Pt species in Pt/C cathode catalyst layers are mapped by a XAFS (X‐ray absorption fine structure) method and by a quick‐XAFS(QXAFS) method. Information on the site‐preferential oxidation and leaching of Pt cathode nanoparticles around the cathode boundary and the micro‐crack in degraded PEFCs is provided, which is relevant to the origin and mechanism of PEFC degradation.